AUTOGLYM POWERMAX 3
MULTIWASH TFR
NON-CAUSTIC. Multi-purpose and biodegradable. For the removal of traffic film, oil, grease and copolymer coatings.
•For cars, light commercials, trucks, engines, chassis, wheels and vehicle interiors.
•Use with hot or cold pressure washers or pre-spray systems.
•Non classified. Minimised environmental impact and user friendly.
•Pre-dilution factor 2 controls cost in use + Pre-dilution factor 7 for general interior cleaning
INSTRUCTIONS: Refer to dilution table below.
HAND PRE-SPRAY Apply evenly with low pressure sprayer, starting with lower areas. Rinse systematically with pressure washer.
HOT OR COLD PRESSURE WASHER Apply systematically, starting with lower areas, rinse clean with high pressure.
COPLOYMER REMOVAL Apply liberally with low pressure sprayer. Allow up to 5 minutes reaction time. Sponge if necessary. DO NOT allow to dry. Rinse systematically with high pressure water, preferably hot.
INTERIOIRS Apply diluted product with a hand spray. Agitate with a sponge or brush, then wipe clean with a clean cloth. DO NOT USE on sensitive leather, valour fabric or suede. PRE TEST on all fabrics before use, DO NOT allow to dry.
PRE DILUTION FACTOR 2 this product can be diluted 1:2 parts water to increase economy, increase detergent valve on machines if required. Dilution table below refers to neat product.
APPLICATION
HAND SPRAY
HOT PRESSURE
COLD PRESSURE
Vehicle Body
1:32
2%
3%
Engine
1:4
4%
6%
Interior
1;7
-
-
Wheels
1:4
-
-
Copoly Removal
1:4
8%
-
SOLD IN 5L CONTAINERS, PLEASE CONTACT US IF YOU WOULD LIKE 25 OR 210L CONTAINERS
WEIGHT 5KG APPROX